Hookup
This type of tutorial shows people how to get a specific product hooked up and working.
Sort by:
Recently Updated
Viewing 571 Hookup Tutorials.
View All Tutorials.
Preassembled 40-pin Pi Wedge Hookup Guide
October 29, 2015
Using the Preassembled Pi Wedge to prototype with the Raspberry Pi B+.
Pi Servo Hat Hookup Guide
September 14, 2017
This hookup guide will show you how to connect and use the Pi Servo Hat in a project.
TSH82 Configurable OpAmp Hookup Guide
November 2, 2018
The TSH82 Configurable OpAmp board offers the designer a great balance of performance and flexibility. We'll show you how to get the very best out of your board!
ML8511 UV Sensor Hookup Guide
March 13, 2014
Get up and running quickly with this simple to use UV sensor.
HMC6343 3-axis Compass Hookup Guide
August 7, 2014
How to hook the HMC6343 -- a high-end, tilt-compensated compass module -- up to an Arduino. Never get lost again!
MAG3110 Magnetometer Hookup Guide
October 24, 2016
Get started with the MAG3110 3-Axis Magnetometer and learn how to make your own digital compass that senses the Earth's magnetic fields.
Teensy XBee Adapter Hookup Guide
June 18, 2015
Getting started with the Teensy 3.1 / Teensy 3.2 and XBee. Establishing a serial link.
SparkFun Qwiic Shield for Arduino Nano Hookup Guide
January 30, 2020
Hookup Guide for the SparkFun Qwiic Shield for Arduino Nano.
CAN-BUS Shield Hookup Guide
October 8, 2015
A basic introduction to working with the CAN-Bus shield.
ESP8266 Thing Development Board Hookup Guide
November 5, 2015
An overview of SparkFun's ESP8266 Thing Development Board - a development board for the Internet of Things.
Qwiic UV Sensor (VEML6075) Hookup Guide
December 20, 2018
Learn how to connect your VEML6075 UV Sensor and figure out just when you should put some sunscreen on.
XBee Shield Hookup Guide
June 5, 2014
How to get started with an XBee Shield and Explorer. Create a remote-control Arduino!
Wireless Motor Driver Shield Hookup Guide
August 17, 2017
Get started with the SparkFun Wireless Motor Driver Shield!
EL Sequencer/Escudo Dos Hookup Guide
December 3, 2015
A basic guide to getting started with the SparkFun EL Sequencer and Escudo Dos to control electroluminescence (EL) wire, panels, and strips.
Teensy Arduino Shield Adapter Hookup Guide
June 18, 2015
A basic introduction and assembly guide for the SparkFun Teensy Arduino Shield Adapter.
Ardumoto Kit Hookup Guide
April 14, 2017
Learn how to assemble and drive DC motors using the v2.0 Ardumoto Shield.
ESP8266 WiFi Shield Hookup Guide
July 16, 2015
Interface your Arduino with an ESP8266 to give it inexpensive access to your WiFi network and the Internet!
GPS Logger Shield Hookup Guide
February 11, 2016
How to assemble and hookup the SparkFun GPS Logger Shield. Never lose track of your Arduino again!
MP3 Player Shield Hookup Guide V15
April 6, 2015
How to get your Arduino groovin' using the MP3 Player Shield.
LS20031 5Hz (66 Channel) GPS Receiver Hookup Guide
December 13, 2018
In this tutorial, we will solder headers to the surface mount pads of the LS20031 GPS receiver and read the output using an Arduino!
HIH-4030 Humidity Sensor Hookup Guide
December 6, 2016
Measure relative humidity with SparkFun's HIH-4030 Humidity Sensor Breakout.
PiRetrocade Assembly Guide
October 28, 2016
Build your very own retro gaming controller with a Raspberry Pi using the SparkFun PiRetrocade Kit!
Pi AVR Programmer HAT Hookup Guide
July 26, 2018
In this tutorial, we will use a Raspberry Pi 3 and the Pi AVR Programmer HAT to program an ATMega328P target. We are going to first program the Arduino bootloader over SPI, and then upload an Arduino sketch over a USB serial COM port.
Sort by:
Recently Updated
Viewing 571 Hookup Tutorials.
View All Tutorials.
Old Tutorials
Looking for the old, archived tutorials? Head on over to the
archived tutorials on the main
SparkFun site.
Please be aware that the tutorials you find there are no longer
actively maintained.