Hookup

Getting started with the SparkFun Proto Pedal. We'll assemble the board, then discuss some of the details of the circuit.

Your guide to the Digital Sandbox! 16+ experiments that, using a graphical programming language, teach you to blink LEDs, monitor microphones, read temperature, and much more.

See the invisible world of infrared radiation using the FLIR Dev Kit and Raspberry Pi.

Hookup Guide for the AST-CAN485 WiFi Shield.

The AST-CAN485 I/O Shield is an Arduino shield that will allow the user to interface the AST-CAN485 Dev Board with 24V inputs and outputs, which expands its usefulness into industrial systems.

Get to know the LP55231 9-channel LED driver., and learn how to configure and program this surprisingly flexible IC.

The TFMini is a ToF (Time of Flight) LiDAR sensor capable of measuring the distance to an object as close as 30 cm and as far as 12 meters! The TFMini allows you to easily integrate LiDAR into applications traditionally reserved for smaller sensors such as the SHARP GP-series infrared rangefinders. With the added Qwiic feature, you can quickly connect to the sensor via I2C!

A quick overview of the Bus Pirate v3.6a

This tutorial shows how to get started with the SparkFun GPS Shield and read and parse NMEA data with a common GPS receiver.

This is a quick guide to using the Google Science Journal app with the Arduino 101 that's included and pre-programmed in the SIK for Google's Science Journal App.

Bring the ability to detect light levels to any project with the SparkFun TEMT6000 Ambient Light Sensor Breakout.

The LilyPad Vibe Board is a small vibration motor that can be sewn into projects with conductive thread and controlled by a LilyPad Arduino. The board can be used as a physical indicator on clothing and costumes for haptic feedback.

The SparkFun MAX30105 Particle Sensor is a flexible and powerful sensor enabling sensing of distance, heart rate, particle detection, even the blinking of an eye. Get ready. Set. Shine!

Basic introduction and hook-up guide for the SparkFun Logomatic.

The Sound Detector is a microphone with a binary output. This guide explains how it works and how you can use it in your projects.

Learn how to build a simple microcontroller circuit using the pre-programmed LilyTiny Board

Make a soft circuit firefly jar with conductive thread, LEDs, and the LilyTwinkle!

This post will walk you through setting up your TJBot and getting started with the first three recipe examples provided by IBM.

Get your Tessel 2 up and running by blinking and LED, the Hello World of embedded electronics.

Getting started with the Pyboard using MicroPython.

How to assemble the WiFi IR Blaster and program it using Arduino. You'll be controlling IR devices from the web in no time!

A basic getting started guided to the SparkFun Transceiver Breakout - nRF24L01+

Add changing colors to your wearable projects using LilyPad Pixel Boards.

How to get the most out of the infrared receivers and transmitters included in the IR Control Kit.