Hookup

The LilyPad ProtoSnap Plus is a sewable electronics prototyping board that you can use to learn circuits and programming with Arduino, then break apart to make an interactive fabric or wearable project.

The LilyPad USB Plus is a sewable microcontroller that you can use with Arduino.

An overview of the updates made in the redesign of the LilyPad Development Board to the LilyPad ProtoSnap Plus and how to adapt code written for the old board to the new one.

See through walls, track objects, monitor breathing patterns, and more using the power of radio frequency with the Walabot! In this tutorial, we will explore Walabot’s features using the Software Demo Kit (SDK) on Windows and the Application Programming Interface (API) on Linux-based distributions for embedded projects.

Using the ESP32 LoRa 1-CH Gateway as a gateway and device, and pushing data to The Things Network.

T5403 Barometric Pressure Sensor Hookup Guide

The TFMini is a ToF (Time of Flight) LiDAR sensor capable of measuring the distance to an object as close as 30 cm and as far as 12 meters! The TFMini allows you to integrate LiDAR into applications traditionally reserved for smaller sensors such as the SHARP GP-series infrared rangefinders.

Learn how to use the SparkFun Photon IMU Shield for your Photon device which houses an on-board LSM9DS1 system-in-a-chip that houses a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer.

A hookup guide for the LSM9DS1, which features a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer. It's an IMU-in-a-chip!

So you've built up a Simon Says kit? What next? This tutorial will get you up and running with Arduino software, guide you through a few example sketches, and send you on your way to create your own. Careful, this stuff is highly addictive. :)

In this tutorial, we'll show you how to use the Flask framework for Python to send data from ESP8266 WiFi nodes to a Raspberry Pi over an internal WiFi network.

The RFD77402 uses an infrared VCSEL (Vertical Cavity Surface Emitting Laser) TOF (Time of Flight) module capable of millimeter precision distance readings up to 2 meters. It’s also part of SparkFun’s Qwiic system, so you won’t have to do any soldering to figure out how far away things are.

How to put together your BYOT (Bring Your Own Tritium) Nuclear Battery Kit!

Put together your Rotary Dial Kit and light it up with our Arduino example code!

This guide will help you get started with electroluminescent (EL) wire, tape, panel, chasing wire, and bendable wire to let your project glow!

How to assemble the decade resistance box, then use it as a design and measurement tool.

How to assemble and use the SparkPunk Sequencer kit.

Examine the inner workings of the SparkPunk Sequencer, then explore some modifications and alternate applications.

Get started with your VL6180 based sensor or the VL6180 breakout board.

How to use the SparkFun Continuous Rotation Servo Trigger with continuous rotation servos, without any programming!

Instructions on hooking up to and communicating with the Si4707 Weather Band Radio Breakout using an Arduino.

A basic guide for getting started using the LilyPad Simple Power with LiPo batteries.

An introduction to matrix scanning, using the SparkFun 4x4 Button Pad.

Hookup guide for the MAX98357A I2S audio breakout board.