Qwiic

Get started interfacing your Qwiic enabled boards with your Raspberry Pi. The Qwiic pHAT connects the I2C bus (GND, 3.3V, SDA, and SCL) on your Raspberry Pi to an array of Qwiic connectors.

Get started passively monitoring motion using the Panasonic EKMC and EKMB sensors with the SparkFun Qwiic PIR.

The Qwiic Pro Kit was designed to allow users to get started with Arduino without the need for soldering or a breadboard. We've included three inputs (a joystick, accelerometer, and proximity sensor) and one display that can be daisy chained to the RedBoard Turbo (SAMD21) Development Board.

An overview of the ATmega32U4-based Qwiic Pro Micro USB-C, how to install it, and how to use it with Arduino.

The SparkFun Qwiic Proximity Sensor is a great, qualitative proximity (up to 20 cm) and light sensor. This hookup guide covers a few examples to retrieve basic sensor readings.

SparkFun’s Qwiic Quad Relay is a product designed for switching not one but four high powered devices from your Arduino or other low powered microcontroller using I2C.

Find out what time it is, even after the power's been out on your project for a while with the Qwiic Real Time Clock (RTC) module.

Create your own digital scale quickly and easily using the Qwiic Scale!

Get started with our Qwiic ecosystem with the Qwiic shield for Arduino or Photon.

Ever wanted to prototype I2C components on a Pi? Now you can!

Get started with the Serial LCD with RGB backlight and 9DoF IMU (ICM-20948) via I2C using the Qwiic system and Python on a Raspberry Pi! Take sensor readings and display them in the serial terminal or SerLCD.

Get started switching those higher power loads around with the Qwiic Single Relay.

The SparkFun Qwiic Speaker Amp includes the Texas Instruments TPA2016D2 stereo, filter-free class-D audio power amplifier. This tutorial will help you get started and configure the amplifer settings using an Arduino microcontroller.

Add a high precision, digital temperature sensor to your projects using the TMP117 over the I2C!

Hookup Guide for the Qwiic ToF Imager - VL53L5CX

Learn how to connect that sweet transparent OLED.

Take your volume knob beyond 11 with the Qwiic Twist digital RGB LED encoder via I2C!

Get started with the Qwiic Ultrasonic Distance Sensor!

Learn how to connect your VEML6075 UV Sensor and figure out just when you should put some sunscreen on.

Figure out how things are oriented with the robust 9 degrees of freedom (DOF) BNO080 IMU. Maybe even make your own virtual reality (VR) applications if you're feeling savvy.

Guide for hooking up your Raspberry Pi 4 Model B basic, desktop, or hardware starter kit together.

Safely reboot or shutdown your Raspberry Pi to avoid corrupting the microSD card using the built-in general purpose button on the Qwiic pHAT v2.0!

A Hookup Guide for the SparkFun Real Time Clock Module - RV-8803 (Qwiic). Learn how to integrate the RV-8803 into your next time-keeping project.

The RedBoard Edge is a RedBoard that's been rebuilt around the idea that projects are eventually put into an enclosure to help clean up their look.