Qwiic



The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields, and cables that make prototyping faster and less prone to error. Get it? It's quick Qwiic! The following tutorials tagged takes advantage of the Qwiic system.

AS726X NIR/VIS Spectral Sensor Hookup Guide

October 19, 2017

It's now easier than ever to measure and characterize how different materials absorb and reflect different wavelengths of light. The AS726X spectral sensors allow you to detect wavelengths in the visible range (VIS) and near infrared range (NIR)!

Build a Qwiic Jukebox that is Toddler Approved!

March 29, 2019

Follow this tutorial to build your own custom jukebox. Note, this is designed simple and tough for use primarily with toddlers. It's also a great introduction to SparkFun's Qwiic products!
New!

Capacitive Touch Slider (CAP1203) Hookup Guide

May 30, 2019

An easy and Qwiic way to add capacitive touch to any of your projects using the CAP1203! In this guide, we go over how to connect and set up your Capacitive Touch Slider so you can start playing with it right away.

CCS811/BME280 (Qwiic) Environmental Combo Breakout Hookup Guide

September 8, 2017

Sense various environmental conditions such as temperature, humidity, barometric pressure, eCO2 and tVOCs with the CCS811 and BME280 combo breakout board.

Displaying Your Coordinates with a GPS Module

April 30, 2019

This Arduino tutorial will teach you how to pinpoint and display your GPS coordinates with a press of a button using hardware from our Qwiic Connect System (I2C).

ESP32 LoRa 1-CH Gateway, LoRaWAN, and the Things Network

August 14, 2018

Using the ESP32 LoRa 1-CH Gateway as a gateway and device, and pushing data to The Things Network.

ESP32 Thing Plus Hookup Guide

March 7, 2019

Hookup guide for the ESP32 Thing Plus using the ESP32 WROOM's WiFi/Bluetooth system-on-chip in Arduino.

GPS-RTK2 Hookup Guide

January 14, 2019

Get precision down to the diameter of a dime with the new ZED-F9P from Ublox.

GPS-RTK Hookup Guide

September 13, 2018

Find out where you are! Use this easy hook-up guide to get up and running with the SparkFun high precision GPS-RTK board.
New!

Hookup Guide for the BlackBoard Artemis

June 24, 2019

Get started with the BlackBoard Artemis - all the functionality of the SparkFun Artemis module wrapped in the familiar Uno footprint

I2C

July 8, 2013

An introduction to I2C, one of the main embedded communications protocols in use today.

IoT Power Relay

May 21, 2018

Using the ESP32 to make a web-configured timed relay.

Keyboard Shortcut, Qwiic Keypad

April 25, 2019

A simple project using the Qwiic Keypad and the RedBoard Turbo to create your own custom hotkey-pad.

LTE Cat M1/NB-IoT Shield Hookup Guide

November 20, 2018

The SparkFun LTE CAT M1/NB-IoT Shield equips your Arduino or Arduino-compatible microcontroller with access to data networks across the globe. This shield adds wireless, high-bandwidth cellular functionality to your IoT project!

Qwiic 12-Bit ADC Hookup Guide

May 23, 2019

Need to add more analog inputs for your project? Check out the Qwiic 12-bit ADC.

Qwiic Accelerometer (MMA8452Q) Hookup Guide

April 5, 2018

Freescale’s MMA8452Q is a smart, low-power, three-axis, capacitive micro-machined accelerometer with 12-bits of resolution. It’s perfect for any project that needs to sense orientation or motion. We’ve taken that accelerometer and stuck it on a Qwiic-Enabled breakout board to make interfacing with the tiny, QFN package a bit easier.

Qwiic Adapter Hookup Guide

November 30, 2017

Get started with your Qwiic adapter board. This adapter breaks out the I2C pins from the Qwiic connectors to pins that you can easily solder with your favorite I2C enabled device.

Qwiic Differential I2C Bus Extender (PCA9615) Hookup Guide

May 31, 2018

Learn how to extend the range of your I2C communication bus with the Qwiic differential I2C bus extender (PCA9615 ) breakout board.

Qwiic Distance Sensor (RFD77402) Hookup Guide

April 5, 2018

The RFD77402 uses an infrared VCSEL (Vertical Cavity Surface Emitting Laser) TOF (Time of Flight) module capable of millimeter precision distance readings up to 2 meters. It’s also part of SparkFun’s Qwiic system, so you won’t have to do any soldering to figure out how far away things are.

Qwiic Distance Sensor (VL53L1X) Hookup Guide

June 18, 2018

The Qwiic VL53L1X time of flight sensor is capable of several modes, as well as having a range of 4M. Let's hook it up and find out just how far away that thing over there is.

Qwiic Flex Glove Controller Hookup Guide

July 19, 2018

Is your finger bent? Is your finger straight? The Qwiic Flex Glove controller board will answer this age old question for you with the flex sensor!

Qwiic GRID-Eye Infrared Array (AMG88xx) Hookup Guide

May 3, 2018

The Panasonic GRID-Eye (AMG88xx) 8x8 thermopile array serves as a functional low-resolution infrared camera. This means you have a square array of 64 pixels each capable of independent temperature detection. It’s like having thermal camera (or Predator’s vision), just in really low resolution.

Qwiic HAT for Raspberry Pi Hookup Guide

November 30, 2017

Get started interfacing your Qwiic enabled boards with your Raspberry Pi. This Qwiic connects the I2C bus (GND, 3.3V, SDA, and SCL) on your Raspberry Pi to an array of Qwiic connectors.

Old Tutorials

Looking for the old, archived tutorials? Head on over to the archived tutorials on the main SparkFun site.
Please be aware that the tutorials you find there are no longer actively maintained.