Hookup

Add some tunes to your project with the Si4703 FM Radio Receiver Breakout.

Instructions on hooking up to and communicating with the Si4707 Weather Band Radio Breakout using an Arduino.

The Si7021 humidity and temperature sensor is an easy to use, digital, low-cost sensor to aid you in all your environment sensing needs.

This guide contains all the information you will need to explore the 21 circuits of the SparkFun Inventor's Kit for the Arduino 101/Genuino 101 Board.

No matter what flavor of the Simon Says Through-hole Soldering Kit you've purchased, this tutorial is here to guide you through the entire build process.

So you've built up a Simon Says kit? What next? This tutorial will get you up and running with Arduino software, guide you through a few example sketches, and send you on your way to create your own. Careful, this stuff is highly addictive. :)

This tutorial will guide you through assembling your Simon Tilts PTH Kit.

A basic guide to getting started with the RFID Tag Reader breakout and how to read and write multiple RFID tags over multiple feet!

This tutorial will go over how to safely charge, connect, disconnect, reinforcing the cables, and handle single cell LiPo batteries.

The Single Supply Logic Converter allows you to bi-directionally translate signals from a 5V or 3.3V microcontroller without the need for a second power supply! The board provides an output for both 5V and 3.3V to power your sensors. It is equipped with a PTH resistor footprint for the option to adjust the voltage regulator on the low side of the TXB0104 for 2.5V or 1.8V devices.

Small in size, small on current draw. It's a smôl world! This guide will get you up and running with the smôl ecosystem.

Equip your Arduino project with a sliding soft potentiometer to monitor position or adding linear control to your project.

A quick hookup guide and project to get you started with the Soil Moisture Sensor from SparkFun.

The Sound Detector is a microphone with a binary output. This guide explains how it works and how you can use it in your projects.

This tutorial shows you how to hook up and use the SparkFun 5V/1A LiPo Charger/Booster circuit.

How to use the SparkFun 9DoF ICM-20948 breakout board for your motion sensing projects. This breakout is ideal for wearable sensors and IoT applications.

Get started adding water-resistant pressure sensing using the SparkFun Absolute Digital Barometer - LPS28DFW (Qwiic) following this guide.

A hookup guide to get started with the SparkFun Air Quality Sensor - SGP30 (Qwiic).

The SparkFun Arduino ProtoShield PCB and ProtoShield kit lets you customize your own Arduino shield using whatever custom circuit you can come up with! This tutorial will go over its features, hardware assembly, and how to use the shield with an Arduino R3 footprint.

The SparkFun Arduino UNO R4 WiFi Qwiic Kit is a great way to get started with Arduino and the Qwiic-connect system - use this guide to get started!

Are you worried about the looming clouds in the distance, how far away is that storm exactly? Add lightning detection with the AS3935 to your next weather station or your next bike ride!

A quick overview of the features of the OLED Block for the Edison.