Hookup

The SparkFun Inventor's Kit (SIK) Experiment Guide contains all of the information needed to build all five projects, encompassing 16 circuits, in the latest version of the kit, v4.1.2 and v4.1.

Learn how to harness the power of the Intel® Edison using JavaScript to post data to the cloud, control electronics from smartphones, and host web pages that interact with circuits.

This guide contains all the information you will need to explore the twelve circuits of the SparkFun Inventors Kit for micro:bit.

The SparkFun Inventor's Kit for MicroView follows our tried and true inventor's kit model, bringing you 11 simple yet fun experiments to introduce you to the SparkFun MicroView.

Dive into the world of the Internet of Things with the SparkFun Inventor's Kit for Photon.

Getting started with the Charlieplexed 8x7 LED array.

Learn how to connect the RedBot Line-Following Sensor Bar to an Arduino-type microcontroller. Use the example sketches to read data from the bar, and try out a simple line-following algorithm.

How to setup and use the LoRa Gateway 1-Channel in Arduino.

A short Hookup Guide to get started with the SparkFun MicroMod Input and Display Carrier Board

A quick guide to show how to configure and use your own 2.4Ghz wireless beacon with the SparkFun NanoBeacon Board - IN100.

Learn how to build a simple paper circuit using copper tape, a 5mm LED, and a 3V coin cell battery.

The SparkFun Photodetector - MAX30101 (Qwiic) is the successor to the MAX30105 particle sensor, a highly sensitive optical sensor. This tutorial will get you started on retrieving the raw data from the MAX30101 sensor.

Get started with these Panasonic EKM-Series PIR breakouts following this Hookup Guide.

The SparkFun ProDriver utilizes Toshiba's TC78H670FTG stepper motor driver and with the latch pin connections, this new board is easier to get started with than the "Easy" Drivers. To get started, follow this hookup guide and you will be spinning stepper motors, in no time.

A hardware overview and hookup guide for the SparkFun Pro nRF52840 Mini -- a breakout for Nordic's impossibly cool Bluetooth/ARM Cortex M4 SoC.

Find out your oxygen saturation level or check out your heart rate using the MAX30101 biometric sensor and MAX32664 Biometric Hub via I2C!

Let's get moving with the SparkFun Triple Axis Digital Accelerometer Breakout - ADXL313 (Qwiic), a low cost, low power, up to 13-bit resolution, 3-axis accelerometer with a 32-level FIFO stack capable of measuring up to ±4g. This hookup guide will get users started reading measurements from the ADXL313, by Analog Devices, with an Arduino microcontroller, Jetson Nano, or Raspberry Pi.

A Hookup Guide to get you started with the Qwiic Alphanumeric Display.

Build a long-range, noise-isolated I2C bus with the SparkFun QwiicBus Kit featuring the QwiicBus EndPoint and MidPoint following this Hookup Guide.

A Hookup Guide for the SparkFun Qwiic Button (Red) and SparkFun Qwiic Button Breakout. Goes over connecting the Qwiic Button to an Arduino microcontroller and using it with the Qwiic Button Arduino library.

Get started using your SparkFun Digital Temperature Sensor - TMP102 (Qwiic) with this Hookup Guide!

A Hookup Guide to get you started with the SparkFun Qwiic Dual Solid State Relay.

Add up to 8 extra I/O pins to your microcontroller with the SparkFun Qwiic GPIO. Get started with the Qwiic GPIO in this Hookup Guide.

Get started using your Qwiic MicroPressure breakout board with this hookup guide.