Hookup
This type of tutorial shows people how to get a specific product hooked up and working.
Getting Started with the MyoWare® 2.0 Muscle Sensor Ecosystem
April 1, 2022
The MyoWare® 2.0 Muscle Sensor, an Arduino-compatible, all-in-one electromyography (EMG) sensor from Advancer Technologies. In this tutorial, we will go over the features and related shields to connect the sensor to a muscle group.
Getting Started with the Raspberry Pi Zero 2 W
December 22, 2021
Learn how to setup, configure and use the latest version of the smallest Raspberry Pi out there, the Raspberry Pi Zero 2 W.
Getting Started with the Raspberry Pi Zero Wireless
July 13, 2017
Learn how to setup, configure and use the smallest Raspberry Pi yet, the Raspberry Pi Zero - Wireless.
Getting Started with the SmartLED Shield for Teensy
November 9, 2018
In this tutorial, we will connect different RGB LED matrix panels to PixelMatix's SmartLED shield and Teensy.
Getting Started with the SparkFun Blynk Board
March 25, 2016
How to provision a Blynk Board - get it connected to Wi-Fi and Blynk, so you can start Blynking!
Getting Started with the SparkFun Inventor's Kit for Google's Science Journal App
May 24, 2016
This is a quick guide to using the Google Science Journal app with the Arduino 101 that's included and pre-programmed in the SIK for Google's Science Journal App.
Getting Started with the Teensy
June 18, 2015
Basic intro to the Teensy line of products, with soldering and programming suggestions.
Getting Started with the Tessel 2
October 12, 2016
Get your Tessel 2 up and running by blinking and LED, the Hello World of embedded electronics.
Getting Started with TJBot
December 14, 2017
This post will walk you through setting up your TJBot and getting started with the first three recipe examples provided by IBM.
Getting Started with u-blox Thingstream and PointPerfect
January 23, 2023
Interested in high precision GNSS without setting up a base station?
Getting Started with Walabot
February 15, 2018
See through walls, track objects, monitor breathing patterns, and more using the power of radio frequency with the Walabot! In this tutorial, we will explore Walabot’s features using the Software Demo Kit (SDK) on Windows and the Application Programming Interface (API) on Linux-based distributions for embedded projects.
GNSS Chip Antenna Hookup Guide
April 4, 2019
You've always wanted to experiment with those tiny GPS antennas. Now you can!
GNSS Correction Data Receiver (NEO-D9S) Hookup Guide
October 27, 2022
Add GNSS correction data to your high precision GNSS (HPG) receiver with the u-blox NEO-D9S! This tutorial will get you started with the ZED-F9P, NEO-D9S, and the ESP32 IoT RedBoard.
GNSS Receiver Breakout - MAX-M10S (Qwiic) Hookup Guide
September 1, 2022
Get started using the SparkFun GNSS Receiver Breakout - MAX-M10S (Qwiic), a ultra-low power, GNSS receiver module for your asset tracking needs!
GNSS Timing Breakout - ZED-F9T (Qwiic) Hookup Guide
January 20, 2022
Follow this guide to add up to 5 nanosecond timing accuracy under clear skies with no external GNSS correction with the GNSS Timing Breakout - ZED-F9T (Qwiic).
GPS Logger Shield Hookup Guide
February 11, 2016
How to assemble and hookup the SparkFun GPS Logger Shield. Never lose track of your Arduino again!
GPS Mouse - GP-808G Hookup Guide
August 24, 2017
Get started with the GP-808G GPS Mouse. This GPS module is great for advanced projects such as autonomous vehicles.
GPS-RTK2 Hookup Guide
January 14, 2019
Get precision down to the diameter of a dime with the new ZED-F9P from u-blox.
GPS-RTK Hookup Guide
September 13, 2018
Find out where you are! Use this easy hook-up guide to get up and running with the SparkFun high precision GPS-RTK NEO-M8P-2 breakout board.
GPS Shield Hookup Guide
March 9, 2015
This tutorial shows how to get started with the SparkFun GPS Shield and read and parse NMEA data with a common GPS receiver.
Graphic LCD Hookup Guide
November 18, 2013
How to add some flashy graphics to your project with a 84x48 monochrome graphic LCD.
H3LIS331DL Accelerometer Breakout Hookup Guide
December 21, 2017
Hookup guide and library usage details for the triple axis accelerometer H3LIS331DL high-g accelerometer.
Hacking Your Maker Faire Badge
September 18, 2014
How to hook-up, program, and modify your Maker Faire Badge for electronic fun.
Haptic Motor Driver Hook-Up Guide
January 19, 2017
Good vibes only. Getting started with the Haptic Motor Driver.
Old Tutorials
Looking for the old, archived tutorials? Head on over to the
archived tutorials on the main
SparkFun site.
Please be aware that the tutorials you find there are no longer
actively maintained.