Hookup

Measure relative humidity with SparkFun's HIH-4030 Humidity Sensor Breakout.

How to hook the HMC6343 -- a high-end, tilt-compensated compass module -- up to an Arduino. Never get lost again!

Drive things "qwiic"-ly with the SparkFun Qwiic Motor Driver!

Get started with our SparkFun Artemis Thing Plus - our popular Thing Plus footprint with the powerful Artemis module for ultimate functionality.

Get started with the RedBoard Artemis - all the functionality of the SparkFun Artemis module wrapped in the familiar Uno R3 footprint

Get started with the RedBoard Artemis ATP - all the functionality of the SparkFun Artemis module wrapped in the Mega Arduino Footprint

Get started with the powerful RedBoard Artemis Nano

How to install CH340 drivers (if you need them) on Windows, Mac OS X, and Linux.

Use RealVNC to connect to your Raspberry Pi to control the graphical desktop remotely across the network.

The HX1 is a low-power amateur radio transmitter that can be used to send data to the Automatic Packet Reporting System (APRS) network.

Hookup guide for the MAX98357A I2S audio breakout board.

How to interface with the INA169 Breakout Board to measure current.

Learn how to get started with our fiber optics breakout boards

How do I install a custom Arduino board/core? It's easy! This tutorial will go over how to install an Arduino board definition using the Arduino Board Manager. We will also go over manually installing third-party cores, such as the board definitions required for many of the SparkFun development boards.

The SparkFun ESP8266 Thing Dev Board is a powerful development platform that lets you connect your hardware projects to the Internet. In this guide, we show you how to combine some simple components to remotely log temperature data, send yourself texts and control lights from afar.

Get started using the IOIO-OTG with your Android device or PC.

Delve into the functionality-rich world of the IoT RedBoard ESP32 Development Board!

This tutorial explains how common infrared (IR) communication works, as well as shows you how to set up a simple IR transmitter and receiver with an Arduino.

How to get the most out of the infrared receivers and transmitters included in the IR Control Kit.

A guide to help you integrate the ISL29125 RGB light sensor breakout board into your electronic projects.

Learn how to interact with the ITG-3200 Triple Axis Gyroscope.

We took two of our biggest robotics partnerships from the previous year and shazamed them together into one robot to rule them all!

We took two of our biggest robotics partnerships from the previous year and shazamed them together into one robot to rule them all!

A simple project using the Qwiic Keypad and the RedBoard Turbo to create your own custom hotkey-pad.