Artemis Development with Arduino
June 20, 2019
Get our powerful Artemis based boards (Artemis Nano, BlackBoard Artemis, and BlackBoard Artemis ATP) blinking in less than 5 minutes using the SparkFun Artemis Arduino Core!
BC118 BLE Mate 2 Hookup Guide
January 15, 2015
Hooking up and using the BLE Mate 2, which uses the BC118 BLE module from BlueCreations.
August 26, 2013
An overview of the Bluetooth wireless technology.
Connectivity of the Internet of Things
July 27, 2016
An overview of the different protocols that can be used for the development of Internet of Things (IoT)-based projects.
ESP32 OTA Updates over BLE from a React Web Application
July 2, 2020
Learn how to flash firmware Over-the-Air using a BLE React WebApp and ESP32
ESP32 Thing Plus Hookup Guide
March 7, 2019
Hookup guide for the ESP32 Thing Plus using the ESP32 WROOM's WiFi/Bluetooth system-on-chip in Arduino.
Gas Pump Skimmers
September 6, 2017
Teardown of gas pump skimmers along with how to detect and block them.
Getting Started with the 8BitDo Bluetooth GamePads
December 2, 2020
Getting up and running with the sweet new 8BitDo game controllers!
Getting Started with the micro:bit
September 2, 2021
The BBC micro:bit is a compact, powerful programming tool that requires no software installation. Read on to learn how to use it YOUR way!
Getting Started with the Raspberry Pi Zero Wireless
July 13, 2017
Learn how to setup, configure and use the smallest Raspberry Pi yet, the Raspberry Pi Zero - Wireless.
Getting Started with the SparkFun Inventor's Kit for Google's Science Journal App
May 24, 2016
This is a quick guide to using the Google Science Journal app with the Arduino 101 that's included and pre-programmed in the SIK for Google's Science Journal App.
GPS-RTK2 Hookup Guide
January 14, 2019
Get precision down to the diameter of a dime with the new ZED-F9P from u-blox.
Hackers in Residence - Hacking MindWave Mobile
February 26, 2014
Review, teardown, and hacking tutorial for the MindWave Mobile, a $99 commercial grade EEG sensor.
Hookup Guide for the SparkFun Artemis Thing Plus
September 19, 2019
Get started with our SparkFun Artemis Thing Plus - our popular Thing Plus footprint with the powerful Artemis module for ultimate functionality.
Hookup Guide for the SparkFun RedBoard Artemis
August 28, 2019
Get started with the RedBoard Artemis - all the functionality of the SparkFun Artemis module wrapped in the familiar Uno footprint
Hookup Guide for the SparkFun RedBoard Artemis ATP
August 28, 2019
Get started with the RedBoard Artemis ATP - all the functionality of the SparkFun Artemis module wrapped in the Mega Arduino Footprint
Hookup Guide for the SparkFun RedBoard Artemis Nano
August 28, 2019
Get started with the powerful RedBoard Artemis Nano
Interactive Hanging LED Array
April 10, 2014
Learn how we converted 72 lightbulbs into an interactive LED array for our conference room.
IOIO-OTG Hookup Guide
May 18, 2016
Get started using the IOIO-OTG with your Android device or PC.
MetaWatch Teardown and Arduino Hookup
August 13, 2013
Tearing down the nifty Bluetooth-enabled MetaWatch. Then building an Arduino sketch to control it.
MicroMod nRF52840 Processor Hookup Guide
January 14, 2021
Get started with the MicroMod nRF52840 Processor following this guide.
MIDI BLE Tutorial
February 22, 2018
Developing a bidirectional MIDI-BLE link with the nRF52832 Breakout.
Nintendo Switch Macro Recording on the Raspberry Pi
July 8, 2020
Learn how to record and playback controller 'macros' for your Nintendo Switch using a Raspberry Pi, SparkFun Top pHAT, and Joycontrol.
nRF52832 Breakout Board Hookup Guide
November 17, 2016
How to hookup and program (in Arduino!) the nRF52832 Breakout -- a development board for Nordic's BLE/ANT/2.4GHz system on chip.
Looking for the old, archived tutorials? Head on over to the
archived tutorials on the main
Please be aware that the tutorials you find there are no longer actively maintained.