Hookup

How to use the MLX90614 or our SparkFun IR Thermometer Evaluation Board to take temperatures remotely, over short distances.

How to get started using the MMA8452Q 3-axis accelerometer -- a solid, digital, easy-to-use acceleration sensor.

Using WiFi to send sensor data from an ESP32 to a WiFi network and be able to read it from an IoT Dashboard from anywhere in the world.

How to get your Arduino groovin' using the MP3 Player Shield.

Incorporate sound into your next project easily with the MP3 Trigger.

Getting started with the MPL3115A2 Pressure Sensor.

A basic guide to get started with the MPU-9150 9 Degrees of Freedom Breakout.

Get up and running with the MPU-9250 9-axis MEMS sensor.

Breakout of MS5803-14BA Pressure Sensor to measure the absolute pressure of the fluid around them to determine altitude, water depth, or any other tasks that require an accurate pressure reading. This includes air, water, and anything else that acts like a viscous fluid.

How to use the 74HC4051 multiplexer breakout to drive eight LEDs, read eight button inputs, or monitor eight potentiometers.

Line of products to work with the MyoWare muscle sensor from Advancer Technologies.

A hookup guide for the Noisy Cricket Stereo Amplifier - 1.5W.

Add color to your projects with non-addressable LED strips! These are perfect if you want to control and power the entire strip with one color for your props, car, fish tank, room, wall, or perhaps under cabinet lighting in your home.

A basic getting started guided to the SparkFun Transceiver Breakout - nRF24L01+

How to hookup and program (in Arduino!) the nRF52832 Breakout -- a development board for Nordic's BLE/ANT/2.4GHz system on chip.

Getting started with the nRF9160 from Circuit Dojo and SparkFun!

How to put together your BYOT (Bring Your Own Tritium) Nuclear Battery Kit!

How to start working with the OBD-II Uart board.

How to use and re-program the OpenLog Artemis, an open source datalogger. The OLA comes preprogrammed to automatically log data. The OLA can also record serial data, analog voltages, or readings from external Qwiic-enabled I2C devices. Some of these Qwiic-enabled devices include GPS/GNSS modules, pressure, altitude, humidity, temperature, air quality, environment, distance, and weight sensors.

An introduction to working with the OpenLog data logger.

How to use and customize the SparkFun OpenPIR motion sensor.

OpenScale allows you to have a permanent scale for industrial and biological applications. Learn how to use the OpenScale board to read and configure load cells.

Add sound effects to your project, prop or costume with Papa Soundie Audio Player.

A quick primer to get you going with the PCA9306 Logic Level Converter.