Tutorials
Modifying Your EL Wire Inverter
July 18, 2019
In this tutorial, we will modify the 12V EL wire inverter to power the EL Sequencer/EL Escudo Dos off a single power supply.
EL Wire Pants
July 18, 2019
In this tutorial, we will sew standard electroluminescent (EL) wire to a pair of pants.
3D Printed Illuminated Wand Prop
November 29, 2018
In this tutorial, we will learn about how to create a theatrical prop for a performance by 3D printing a wand and adding an LED.
Getting Started with 3D Printing Using Tinkercad
April 30, 2018
Tinkercad is a great, easy-to-use online modeling software that can have you 3D printing quickly. This tutorial will walk you through designing a simple project enclosure.
Light Up Your 3D Printer's Bed
June 27, 2018
Having issues viewing your print in a dark lit room? In this tutorial, we will be using LED strips to light up a print bed's area on a LulzBot 3D printer!
PCA9306 Logic Level Translator Hookup Guide (v2)
July 25, 2019
A quick primer to get you going with the PCA9306 Logic Level Converter - a dedicated I2C translator.
Getting Started with the SparkFun Blynk Board
March 25, 2016
How to provision a Blynk Board - get it connected to Wi-Fi and Blynk, so you can start Blynking!
MPL3115A2 Pressure Sensor Hookup Guide
December 5, 2013
Getting started with the MPL3115A2 Pressure Sensor.
SparkFun USB UART Breakout (CY7C65213) Hookup Guide
February 2, 2017
How to use SparkFun's advanced USB UART breakout, based on the Cypress CY7C65213.
MicroView Hookup Guide
December 15, 2016
A quick tutorial to get you up and running with your MicroView Development Board.
Red Box Robot Hookup Guide
November 23, 2016
Turn an iconic SparkFun red box into an obstacle-avoiding robot.
Single Supply Logic Level Converter Hookup Guide
August 9, 2018
The Single Supply Logic Converter allows you to bi-directionally translate signals from a 5V or 3.3V microcontroller without the need for a second power supply! The board provides an output for both 5V and 3.3V to power your sensors. It is equipped with a PTH resistor footprint for the option to adjust the voltage regulator on the low side of the TXB0104 for 2.5V or 1.8V devices.
PCA9306 Level Translator Hookup Guide
October 31, 2013
A quick primer to get you going with the PCA9306 Logic Level Converter.
LilyPad Tri-Color LED Hookup Guide
April 20, 2018
Learn how to hook up the LilyPad Tri-Color LED and use a common anode RGB LED in e-textile projects.
LDK Experiment 5: Make Your Own Switch
October 2, 2013
Learn to create and integrate your own handmade switch into an e-textile circuit.
Setting Up the Pi Zero Wireless Pan-Tilt Camera
September 14, 2017
This tutorial will show you how to assemble, program, and access the Raspberry Pi Zero as a headless wireless pan-tilt camera.
SparkFun USB to Serial UART Boards Hookup Guide
February 18, 2016
How to use the SparkFun FTDI based boards to program an Arduino and access another serial device over the hardware serial port, without unplugging anything!
Little Soundie Audio Player Hookup Guide
April 26, 2018
Add sound effects to your project, prop or costume with Little Soundie Audio Player.
Qwiic Adapter Hookup Guide
November 30, 2017
Get started with your Qwiic adapter board. This adapter breaks out the I2C pins from the Qwiic connectors to pins that you can easily solder with your favorite I2C enabled device.
Photon Remote Water Level Sensor
June 2, 2016
Learn how to build a remote water level sensor for a water storage tank and how to automate a pump based off the readings!
Powering LilyPad LED Projects
December 17, 2016
Learn how to calculate how many LEDs your LilyPad project can power and how long it will last.
Qwiic Magnetometer (MLX90393) Hookup Guide
May 3, 2018
Figure out how magnetic fields are oriented, all without having to solder a thing.
Old Tutorials
Looking for the old, archived tutorials? Head on over to the
archived tutorials on the main
SparkFun site.
Please be aware that the tutorials you find there are no longer
actively maintained.