Tutorials

Everything you need to know about using the Spectacle Inertia Board in one place.

All the information you need to use the Spectacle Light and Sound Kit in one place.

All the information you need to use the Spectacle Light Board in one place.

All the information you need to use the Spectacle Light Kit in one place.

All the information you need to use the Spectacle Motion Kit in one place.

All the information you need to use the Spectacle Motion Kit in one place.

All the information you need to use the Spectacle Sound Kit in one place.

The Spectacle system is designed to help those without electronics or programming experience integrate electronics into projects.

Learn how to wield the power of 18 channels of UV to NIR spectroscopy with AS72651 (UV), AS72652 (VIS), and AS72653 (NIR) sensors!

Want your project to react to music? Then the SparkFun Spectrum Shield is the product for you! Get going in no time with this Hookup Guide.

Using the SSOP-16 to DIP adapter board.

Hardware guide for the Stepoko

Get started with the STM32 Thing Plus!

How to hookup the Sunny Buddy: a solar-powered, MPPT (peak-power tracking), LiPo battery charger.

Are you to sleepy to enjoy a sunrise on a brisk morning? Yeah...us too! No worries, with a Webcam, a Tessel 2 and a bit of code you can sleep in and catch the sunrise at your leisure with the Sunrise Machine.

Learn how you can use the SX1509 to control 16 LEDs or up to 64 buttons with just two pins.

T5403 Barometric Pressure Sensor Hookup Guide

Basic hookup guide for the TB6612FNG H-bridge motor driver to get your robot to start moving!

Nate picked up a bricktastic phone in China. Let's take it apart!!!

A quick tear down of the popular fitness tracking device, the Misfit Shine.

Create an innocuous-looking USB stick with an Arduino Pro Micro and a 3D printed case that moves your mouse pointer randomly every few seconds. Sure to anger your coworkers and friends!

A basic introduction and assembly guide for the SparkFun Teensy Arduino Shield Adapter.

A guide to using the TeensyView OLED board to display text and graphics.

Getting started with the Teensy 3.1 / Teensy 3.2 and XBee. Establishing a serial link.