Tutorials

New!

Nuclear Battery Assembly Guide

June 8, 2018

How to put together your BYOT (Bring Your Own Tritium) Nuclear Battery Kit!
New!

HX1 APRS Transmitter Hookup Guide

June 7, 2018

The HX1 is a low-power amateur radio transmitter that can be used to send data to the Automatic Packet Reporting System (APRS) network.
New!

LilyPad USB Plus Hookup Guide

June 7, 2018

The LilyPad USB Plus is a sewable microcontroller that you can use with Arduino.
New!

LilyPad Light Sensor V2 Hookup Guide

June 7, 2018

How to hook up the LilyPad Light Sensor as well as some project ideas and example code.
New!

RedBoard Edge Hookup Guide

June 1, 2018

The RedBoard Edge is a RedBoard that's been rebuilt around the idea that projects are eventually put into an enclosure to help clean up their look.
New!

Qwiic Real Time Clock Module (RV-1805) Hookup Guide

May 31, 2018

Find out what time it is, even after the power's been out on your project for a while with the Qwiic Real Time Clock (RTC) module.
New!

Flexible Grayscale OLED Hookup Guide

May 31, 2018

Figure out how to get images displaying on your new flexible OLED screen.
New!

Qwiic Differential I2C Bus Extender (PCA9615) Hookup Guide

May 31, 2018

Learn how to extend the range of your I2C communication bus with the Qwiic differential I2C bus extender (PCA9615 ) breakout board.
New!

PIC-Based Serial Enabled Character LCD Hookup Guide

May 29, 2018

The PIC-based serial enabled character LCD backpack is a simple and cost effective solution for interfacing to character Liquid Crystal Displays (LCDs) based on the HD44780 controller. The backpack simplifies the number of wires needed and allows your project to display all kinds of text and numbers.
New!

Variable Load Hookup Guide - Revised

May 25, 2018

This tutorial will show you how to assemble and use SparkFun's Variable Load board. It can be used to test stability of the power supply under various loads, battery lifetime, safety cutoffs, and other design elements of power supplies under test.
New!

Adapting LilyPad Development Board Projects to the LilyPad ProtoSnap Plus

May 24, 2018

An overview of the updates made in the redesign of the LilyPad Development Board to the LilyPad ProtoSnap Plus and how to adapt code written for the old board to the new one.
New!

IoT Power Relay

May 21, 2018

Using the ESP32 to make a web-configured timed relay.

SparkFun Arduino ProtoShield Hookup Guide

May 17, 2018

The SparkFun Arduino ProtoShield PCB and ProtoShield kit lets you customize your own Arduino shield using whatever custom circuit you can come up with! This tutorial will go over its features, hardware assembly, and how to use the shield with an Arduino R3 footprint.

LIDAR-Lite v3 Hookup Guide

May 16, 2018

A tutorial for connecting the Garmin LIDAR-Lite v3 or the LIDAR-Lite v3HP to an Arduino to measure distance.

12V/5V Power Supply Hookup Guide

May 10, 2018

In this tutorial, we will replace the 12V/5V (2A) power supply's molex connector with two male barrel jacks adapters.

Gator:bit Hookup Guide

May 10, 2018

Gator:bit is a rugged development breakout board for the BBC micro:bit. Gator:bit exposes almost every pin on the micro:bit to an alligator clippable pad. Gator:bit features over-voltage, over-current, and short circuit protection circuitry on every IO pin as well as built-in addressable LEDs, built-in buzzer, and a power management solution to give you sensible powering options.

IoT Weight Logging Scale

May 9, 2018

This tutorial will show you how to make a scale that logs your weight to a custom website on the Internet. The principles can be extrapolated to any type of data.

micro:bit Educator Lab Pack Experiment Guide

May 8, 2018

A quickstart guide for the micro:bit educator lab pack.

Qwiic GRID-Eye Infrared Array (AMG88xx) Hookup Guide

May 3, 2018

The Panasonic GRID-Eye (AMG88xx) 8x8 thermopile array serves as a functional low-resolution infrared camera. This means you have a square array of 64 pixels each capable of independent temperature detection. It’s like having thermal camera (or Predator’s vision), just in really low resolution.

Qwiic Magnetometer (MLX90393) Hookup Guide

May 3, 2018

Figure out how magnetic fields are oriented, all without having to solder a thing.

WiFi Controlled Robot

May 2, 2018

This tutorial will show you how to make a robot that streams a webcam to a custom website that can be remotely controlled.

Getting Started with 3D Printing Using Tinkercad

April 30, 2018

Tinkercad is a great, easy-to-use online modeling software that can have you 3D printing quickly. This tutorial will walk you through designing a simple project enclosure.

Qwiic VR IMU (BNO080) Hookup Guide

April 30, 2018

Figure out how things are oriented with the robust 9 degrees of freedom (DOF) BNO080 IMU. Maybe even make your own virtual reality (VR) applications if you're feeling savvy.

Little Soundie Audio Player Hookup Guide

April 26, 2018

Add sound effects to your project, prop or costume with Little Soundie Audio Player.

Old Tutorials

Looking for the old, archived tutorials? Head on over to the archived tutorials on the main SparkFun site.
Please be aware that the tutorials you find there are no longer actively maintained.