Wireless

Getting started with the Teensy 3.1 / Teensy 3.2 and XBee. Establishing a serial link.

Quick tips regarding how to connect, protect, and disconnect U.FL connectors.

SparkFun has two boards using the BC127; here's what you need to know to use them.

In this tutorial, we'll find out how to use Resolume Arena, a popular video jockey software, to control custom-made ArtNet DMX fixtures.

In this tutorial, we'll show you how to use the Flask framework for Python to send data from ESP8266 WiFi nodes to a Raspberry Pi over an internal WiFi network.

How to get started using the BlueSMiRF and Bluetooth Mate Silvers.

Cypress's PSoC 6 Pioneer Board is a development tool for the powerful PSoC 6 processor. In this tutorial, we'll show you how to use the PSoC 6 Pioneer Board along with the SparkFun/Digi-Key Pioneer IoT Add-on Shield to send data to a Raspberry Pi via BLE or WiFi.

This tutorial will show you how to make a robot that streams a webcam to a custom website that can be remotely controlled.

How to get the WiFly Shield up and running.

Reprogram your Arduino from anywhere in the world using the Tomatoless Boots wireless bootloader with the Electric Imp.

Build a custom wireless audio Bluetooth adapter using BlueCreation's BC127 and add it to your old speaker system!

In this tutorial, we will build an EL wire dance suit that can be controlled by a wireless glove controller!

Control the RedBot wirelessly based on the movement of your hand using an accelerometer, Arduino, and XBees!

Build a wireless glove controller with Arduinos to trigger an LED using XBees!

A hookup guide for the SparkFun Wireless Joystick Kit.

Get started with the SparkFun Wireless Motor Driver Shield!

In this tutorial, we will expand on the SIK for RedBot to control the robot wirelessly with XBee radios! We'll explore a different microcontroller and wirelessly control the RedBot at a distance.

In this tutorial, we will utilize the MakeCode radio blocks to have the one micro:bit transmit a signal to a receiving micro:bit on the same channel. Eventually, we will control a micro:bot wirelessly using parts from the arcade:kit!

Monitor the weather without being exposed to it through wireless communication between two micro:bits using the radio blocks! This is useful if your weather station is installed in a location that is difficult to retrieve data from the OpenLog. We will also explore a few different ways to send and receive data.

Time for racing, let's make a wireless timing device using ESP32 wireless communication.

Get started with SparkFun's XBee3 Thing Plus - both the u.FL as well as the PCB antenna versions.

How to get started with an XBee Shield and Explorer. Create a remote-control Arduino!

An overview of Digi's WiFi XBees, and a quick how-to on getting them connected and interfacing with the cloud.