Arduino

How to get the most out of the infrared receivers and transmitters included in the IR Control Kit.

The LilyPad ProtoSnap Plus is a sewable electronics prototyping board that you can use to learn circuits and programming with Arduino, then break apart to make an interactive fabric or wearable project.

The LilyPad USB Plus is a sewable microcontroller that you can use with Arduino.

A playful, geeky tutorial for a leather bracer that uses a LilyPad Arduino, LilyPad accelerometer, and seven segment display to roll virtual 4, 6, 8, 10, 12, 20, and 100 side dice for gaming.

Using the ESP32 LoRa 1-CH Gateway as a gateway and device, and pushing data to The Things Network.

So you've built up a Simon Says kit? What next? This tutorial will get you up and running with Arduino software, guide you through a few example sketches, and send you on your way to create your own. Careful, this stuff is highly addictive. :)

Put together your Rotary Dial Kit and light it up with our Arduino example code!

Get started with your VL6180 based sensor or the VL6180 breakout board.

Not sure which LilyPad Arduino is right for you? We'll discuss the features of each and help you decide.

An introduction to matrix scanning, using the SparkFun 4x4 Button Pad.

Hookup guide for the MAX98357A I2S audio breakout board.

How about that humidity? This tutorial shows how to add sensing capability to the 21st Century Fashion Kit's RGB flower project.

Figure out how to get images displaying on your new flexible OLED screen.

The HX1 is a low-power amateur radio transmitter that can be used to send data to the Automatic Packet Reporting System (APRS) network.

How to hook up the LilyPad Light Sensor as well as some project ideas and example code.

Learn how to program in Arduino with the LilyPad ProtoSnap Plus. This guide includes 10 example activities that use the pre-wired LilyPad boards on the LilyPad ProtoSnap Plus.

The LilyPad Development Board is a sewable electronics prototyping board that you can use to learn circuits and programming with Arduino, then break apart to make an interactive fabric or wearable project.

Learn how to program in Arduino with the LilyPad Development Board. This guide includes 11 example activities that use the pre-wired LilyPad boards on the LilyPad Development Board.

How to hook up the LilyPad Light Sensor as well as some project ideas and example code.

The SparkFun Inventor's Kit for MicroView follows our tried and true inventor's kit model, bringing you 11 simple yet fun experiments to introduce you to the SparkFun MicroView.

Let's take the same examples from the ArduBlock-based Digital Sandbox guide, and implement them using Arduino code.

How to connect and use the SparkFun ZX Distance and Gesture Sensor with an Arduino.

This tutorial goes over the how to assemble the Chibitronics' Chibi Chip programmable microcontroller with the Chibi Clip to add more functionality to your paper circuits! Start programming your Chibi Chip by writing code (block-based and text-based) in a browser-based code editor and then transmit code through sound to your board!

Create an innocuous-looking USB stick with an Arduino Pro Micro and a 3D printed case that moves your mouse pointer randomly every few seconds. Sure to anger your coworkers and friends!