Arduino

Add millimeter precision location data to your MicroMod project with this guide for the SparkFun MicroMod GNSS Function Board - ZED-F9P.

Interested in high precision GNSS without setting up a base station?

Get started with the SparkFun Pressure Sensor - BMP581 (Qwiic) following this Hookup Guide

Get started with the MicroMod nRF52840 Processor following this guide.

Create your own digital scale quickly and easily using the Qwiic Scale!

A hookup guide for the HX711 load cell amplifier breakout board

This tutorial will show you how to communicate with your serial devices using a variety of terminal emulator applications.

Find all your degrees of freedom with this little Qwiic breakout board combining the ISM330DHCX 6Dof and the MMC5983MA Magnetometer!

The MicroMod ESP32 Function Board adds additional wireless options to MicroMod Processor Boards that do not have that capability. This special function board acts as a coprocessor that takes advantage of Espressif's ESP32 WROOM to add WiFi and Bluetooth® to your applications.

The SparkFun Audio Codec Breakout - WM8960 is a low power, high quality stereo codec chock full of features. In this tutorial, some of these features by using an Arduino microcontroller to configure the audio codec and pass audio to the headphone or speaker channels.

An overview of the ATmega32U4-based Qwiic Pro Micro USB-C, how to install it, and how to use it with Arduino.

Is your air safe? Check your eCO2, TVOC, and AQI levels with the new SparkFun Indoor Air Quality Sensor - ENS160!

An introduction to working with the OpenLog data logger.

Get started using the SparkFun GNSS Receiver Breakout - MAX-M10S (Qwiic), a ultra-low power, GNSS receiver module for your asset tracking needs!

The SparkFun Qwiic Speaker Amp includes the Texas Instruments TPA2016D2 stereo, filter-free class-D audio power amplifier. This tutorial will help you get started and configure the amplifer settings using an Arduino microcontroller.

Add a configurable NFC/RFID tag to your Qwiic ecosystem by following this guide.

This tutorial provides information about how to connect to ADH-Tech's fingerprint scanner (GT-521F32) and how to use it with Hawley's FPS_GT511C3 library for Arduino.

A hookup guide for the SparkFun Satellite Transceiver - Swarm M138 (KIT-21287)

A "Coulomb Counter" is like a gas gauge for your battery. Here's how to use it.

The SparkFun ZOE-M8Q and SAM-M8Q are two similarly powerful GPS units but with different project applications. We'll compare both chips before getting each up and running.

Get started with the Air Velocity Sensor Breakout - FS3000!

An introduction and getting started guide for the Battery Babysitter - a flexible LiPo battery charger and monitor.

Add low power triple axis motion monitoring to your Qwiic project using the SparkFun Triple Axis Accelerometer Breakout - BMA400 (Qwiic).

Is your finger bent? Is your finger straight? The Qwiic Flex Glove controller board will answer this age old question for you with the flex sensor!