nRF9160 Thing Plus Hookup Guide
Contributors:
Circuit Dojo, Ell C
Circuit Dojo, Ell C 
Resources and Going Further
For more information, check out the resources below:
Circuit Dojo information:
- Documentation
- Community Forum
- Compatible Cloud Providers
- Cellular Provider Matrix
- Verizon Operation
- Troubleshooting
Nordic Semiconductor:
- nRF9160 Product Page
- nRF9160 Documentation
- nRF9160 cellular IoT System-In-Package brief
- Further Examples
Check out these related tutorials:
Wireless Glove Controller
Build a wireless glove controller with Arduinos to trigger an LED using XBees!
Secure DIY Garage Door Opener
Did you know that most garage doors are at risk of a roll jam attack? Here we make a DIY garage door remote-control system that is much more secure than most commercial-ready products using the latest in ECC cryptography.
Audio Codec Breakout - WM8960 Hookup Guide
The SparkFun Audio Codec Breakout - WM8960 is a low power, high quality stereo codec chock full of features. In this tutorial, some of these features by using an Arduino microcontroller to configure the audio codec and pass audio to the headphone or speaker channels.
Qwiic Kit for Raspberry Pi V2 Hookup Guide
Get started with the SGP40, BME280, VCNL4040, and microOLED via I2C using the Qwiic system and Python on a Raspberry Pi! Measure VOC Index, light, temperature, humidity, and pressure from the environment. Then display them on the microOLED, serial terminal, or the cloud with Cayenne!