Simon Tilts Assembly Guide

Contributors: QCPete

Cleaning

Before we move on to the final assembly steps, this is a good time to clean your board. Note, this is not absolutely necessary; your Simon Tilts will most likely work even without cleaning. We suggest cleaning it to avoid getting flux on your fingers during game play.

To clean your Simon Tilts, first ensure that you do not have the batteries installed.

You can clean your board using an old toothbrush and some DI water or alcohol.

If you have compressed air, this is a quick way to blow off any liquid. If not, then a paper towel or tissue paper can do the trick.

If you'd like to learn more about cleaning, please check out this tutorial: Electronics Assembly - Washing