ReconBot with the Tessel 2

Contributors: rwaldron

Finishing the Robot's Construction

Onward! Secure the Tessel 2 to the lower chassis with wire ties, and use a piece of scotch tape across the pin headers on the Tessel 2 to hold the wires in place so they don't jiggle out of place when the robot is roving. Connect the USB camera to either of the USB host inputs:

Align the top assembly over the bottom assembly and snap it into place. The camera should be on the breadboard end of the chassis.

Give your assembled Reconbot: Tessel 2 Edition a turn and admire your handiwork:

Nice looking robot, eh?