LiPo Fuel Gauge (MAX1704X) Hookup Guide
Contributors:
bboyho
bboyho 
Resources and Going Further
Now that you've successfully got your LiPo Fuel Gauge (MAX17043) up and running, it's time to incorporate it into your own project! For more information, check out the resources below:
- v1.2
- Fritzing Part
- Datasheet (PDF)
- C Example Code (ZIP)
- Particle Photon Library
- Arduino Project Example
- SparkFun Arduino Library
- Arduino Library - Arduino library from user "porrey." This is another Arduino library that is available.
- GitHub Hardware Repo
Need some inspiration for your next project? Check out some of these related tutorials. Looking for an alternative solution to using a display? Try using an RGB LED to display the remaining charge.
Photon Battery Shield Hookup Guide
The Photon Battery Shield has everything your Photon needs to run off, charge, and monitor a LiPo battery. Read through this hookup guide to get started using it.
Battery Babysitter Hookup Guide
An introduction and getting started guide for the Battery Babysitter - a flexible LiPo battery charger and monitor.
SparkFun RTK Facet Hookup Guide
Setup the RTK Facet in minutes to begin gathering millimeter level geospatial coordinates.
Or check out some of these blog posts for ideas using LiPo fuel gauges.