SD Cards and Writing Images

Contributors: M-Short
Favorited Favorite 19

Resources and Going Further

Now that you know how to install an image on an SD card, it's time to get out there and create some great SBC projects. Need some inspiration? Check out these other related tutorials from SparkFun.

Raspberry Pi 3 Starter Kit Hookup Guide

Guide for getting going with the Raspberry Pi 3 Model B and Raspberry Pi 3 Model B+ starter kit.

PiRetrocade Assembly Guide

Build your very own retro gaming controller with a Raspberry Pi using the SparkFun PiRetrocade Kit!

Getting Started with the Raspberry Pi Zero Wireless

Learn how to setup, configure and use the smallest Raspberry Pi yet, the Raspberry Pi Zero - Wireless.

Getting Started with the Autonomous Kit for the Sphero RVR

Want to get started in robotics? Look no further than the SparkFun autonomous kit for the Sphero RVR! Whether you purchased the Basic or Advanced kit, this tutorial will get you rolling...

If you are not flashing an image to a microSD card, check out these other SD card-related projects.

MicroSD Shield and SD Breakout Hookup Guide

Adding external storage in the form of an SD or microSD card can be a great addition to any project. Learn how in this hookup guide for the microSD shield and SD breakout boards.

MP3 Player Shield Hookup Guide V15

How to get your Arduino groovin' using the MP3 Player Shield.

MicroSD Breakout With Level Shifter Hookup Guide

How to use the level translating µSD device.

OpenLog Hookup Guide

An introduction to working with the OpenLog data logger.

Or check out this blog post.