Comments: RedBot Assembly Guide Rev 02
Looking for answers to technical questions?
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
To make it super clear that the assembly guide documentation has the DAGU Wheel Encoder, we just added a note on the product page. The old RedBot Assembly guide used the RedBot Encoder, but there is a couple different hardware. :)
Yes; contact customer service
If you've found an issue with this tutorial content, please send us your feedback!
I recently purchased a RedBot from SparkFun, and also ordered a RedBot Sensor - Wheel Encoder. What I received for the wheel encoder was SEN-12617. This encoder looks nothing like the encoder that is shown in RedBot Assembly Guide Rev 02. Can I return the encoders that I received for the encoders discussed in the assembly instructions?