micro:climate Kit Experiment Guide

Contributors: D___Run___
Favorited Favorite 1

Introduction to the Micro:Climate Kit


We have seen a huge amount of excitement from hobbyists, students and scientists around building a DIY weather station to track what is going on around us on Planet Earth on a daily basis.

We have seen just as much excitement around the BBC’s newly released micro:bit, which made its debut in the United Kingdom and is now available in the United States through SparkFun.

And then it dawned on us…why not combine the two? So, here it is: a weather station kit that is built on top of the inexpensive, easy-to-use micro:bit and Microsoft MakeCode. We have also written seven experiments that walk you through how to use each and every component of the kit and how to use them with the micro:bit and Microsoft MakeCode.

What’s Included in the Kit?

Below is all the parts included in the SparkFun micro:climate kit.

SparkFun micro:climate kit

SparkFun micro:climate kit


The kit comes with everything you need to build a fully featured weather station for the micro:bit. All you need to supply is, well, the micro:bit!

micro:bit Board

micro:bit Board


The kit includes the following parts:

  • SparkFun weather:bit — The carrier board for the micro:bit and the central component to building a weather station
  • Weather Meter — Wind speed, direction and rain gauge that connects to the SparkFun weather:bit
  • SparkFun Soil Moisture Sensor — A simple probe for measuring soil moisture
  • Waterproof Temperature Sensor — Waterproof temperature sensor with a long wire
  • SparkFun OpenLog — A small widget that logs any data sent to it over a serial connection to a microSD card
  • 10-Pack of M/M 12" Jumper Wires — Jumper wires for connecting things
  • SparkFun Screwdriver — Great for tightening screws and screw terminals

How to Use This Guide

Please note that this guide is designed to get you started with the weather:bit board and the SparkFun micro:climate kit in a simple, straightforward way. We demonstrate each component’s functionality and the corresponding code to make it work.

While you explore this guide, we urge you to take your time and tinker with the sensors, code and ideas shared to build something tailored to your application. Our goal is to get you enough information and know-how to make you dangerous and then release you into the wild, weather station in hand, to do whatever you do with a weather station.

Be sure to share your projects with us via Twitter or Facebook! We are excited to see you get creative and Start Something!

Suggested Reading

Before continuing with this guide, we recommend you be somewhat familiar with the concepts in the following tutorials:

What is a Circuit?

Every electrical project starts with a circuit. Don't know what a circuit is? We're here to help.

Getting Started with the micro:bit

The micro:bit is a compact, powerful programming tool that requires no software installation. Read on to learn how to use it YOUR way!

Open Source!

All of our experiments and guides are licensed under the Creative Commons Attribution Share-Alike 4.0 Unported License. Feel free to remix and reuse our work. But please, share the love and give us attribution for our hard work!

To view a copy of this license visit this link, or write: Creative Commons, 171 Second Street, Suite 300, San Francisco, CA 94105, USA.