Comments: LP55231 Breakout Board Hookup Guide


Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Member #1373549 / about 6 years ago / 1

    Hi Chip Internals are not correct. If you check the lp55231 datasheet Typical Application on page 1 you see that GREEN and BLUE is just flipped in your picture. PWM1 is GREEN1, PWM2 is BLUE1 (same problem with led2 and led3) Regards

If you've found an issue with this tutorial content, please send us your feedback!