LilyPad ProtoSnap Plus Hookup Guide
Contributors:
MikeGrusin, 
Gella
MikeGrusin, Gella 
Stitching Into a Project
Once you are done exploring the parts of the ProtoSnap Plus and prototyping your code, you can snap along the perforations on the board to remove the individual LilyPad pieces and build them into a project.
Carefully snap the pieces of the ProtoSnap apart to prepare for sewing. Use a set of pliers or diagonal cutters if you are having trouble snapping the pieces apart. Discard the non-sewable pieces and scraps. The conductive pathways on the ProtoSnap can then be recreated with conductive thread by stitching the components in your project.
These tutorials will give you some tips and tricks for project construction and insulation:
Insulation Techniques for e-Textiles
Learn a few different ways to protect your conductive thread and LilyPad components in your next wearables project.