Twinkling Trick or Treat Bag

Contributors: Gella
Favorited Favorite 7

Step 5: Power It Up

After all the stitching is done, check your design for any loose thread tails or short circuits (threads overlapping where they shouldn't). If everything looks okay, insert the battery into the battery holder and turn the switch to the ON position. Your design should start twinkling!

Insert battery into battery holder

If your design is not lighting up, you may need to do some troubleshooting. Refer to the E-Textile Basics tutorial for help if you need it.

Now let's finish decorating our tote by adding some felt shapes to hide the components.