Twinkling Trick or Treat Bag

Contributors: Gella
Favorited Favorite 6

Step 2: Attach Components

Look at your design to identify the outlines where each component is placed. Line up the positive and negative symbols on your components with their matching outline on the tote bag. Then use a little dab of hot glue on the back of the pieces to adhere to the fabric. Be careful not to fill any of the sewing holes with hot glue. If your glue is seeping through the first layer of fabric and accidentally gluing the bag shut, use a piece of cardboard inside the tote while attaching components.

Gluing LilyPad components

alt text

If you'd rather have your battery holder on the inside of the bag than the outside, it will look like this (picture is of finished project):

alt text