RedBot Assembly Guide Rev 02

This Tutorial is Retired!

This tutorial covers concepts or technologies that are no longer current. It's still here for you to read and enjoy, but may not be as useful as our newest tutorials.

Pages
Contributors: HelloTechie, SFUptownMaker
Favorited Favorite 2

**RedBot Buzzer**

Read on if you are using the RedBot buzzer. If not, skip to the next section.

Adding the RedBot buzzer is nice and easy!

Locate the Following:

1x RedBot Buzzer
RedBot Buzzer

Adding the RedBot Buzzer

Locate the position on the RedBot Mainboard to add the RedBot buzzer. With the buzzer side and female header PCB side of the RedBot buzzer facing to the left, place the RedBot buzzer on top of the "9," "POW," and "GND" male header pin row in the "SERVO" section on the RedBot Mainboard.

Adding the RedBot Buzzer