MicroMod ESP32 Processor Board Hookup Guide
Introducing the SparkFun MicroMod ESP32 Processor Board! This bad boy pops an M.2 connector onto the ESP32 so you can take advantage of all that lovely ESP32 power with any of our MicroMod carrier boards. Grab yourself an ESP32 MicroMod Processor Board and let's dive in!
SparkFun MicroMod ESP32 ProcessorWRL-16781
In addition to your ESP32 Processor Board, you'll need a carrier board to get started. Here we use the Input and Display Carrier Board, but there are a number of others you can choose from.
SparkFun MicroMod ATP Carrier BoardDEV-16885
You'll also need a USB-C cable to connect the Carrier to your computer and if you want to add some Qwiic breakouts to your MicroMod project you'll want at least one Qwiic cable to connect it all together. Below are some options for both of those cables:
SparkFun Qwiic Cable KitKIT-15081
Qwiic Cable - 100mmPRT-14427
USB 3.1 Cable A to C - 3 FootCAB-14743
Reversible USB A to C Cable - 2mCAB-15424
Depending on which Carrier Board you choose, you may need a few extra peripherals to take full advantage of them. Refer to the Carrier Boards' respective Hookup Guides for specific peripheral recommendations.
The SparkFun MicroMod ecosystem is a unique way to allow users to customize their project to their needs. Do you want to send your weather data via a wireless signal? There's a MicroMod processor for that. Looking to instead maximize efficiency and processing power? You guessed it, there's a MicroMod processor for that. If you are not familiar with the MicroMod system, take a look here:
We recommend taking a look through the following tutorials if you are not familiar with the concepts covered in them: