LilyTiny Plush Monster
Contributors:
Gella
Gella 
Step 3: Stitch Power and Ground Lines
Time to sew! Thread a needle with ~12 inches of conductive thread and tie a knot at the end.
Start by looping 2-3 times through and around the positive sew tab of the battery holder closest to the LilyTiny.
Stitch across the fabric until you reach the positive tab on the LilyTiny. Loop 2-3 times and knot it there. Cut off any excess thread.
Repeat this process for the negative tab on the battery holder to connect it to the negative tab on the LilyTiny.
