LilyTiny Plush Monster

Pages
Contributors: Gella
Favorited Favorite 10

Step 2: Place Components

We'll start building our monster by attaching the LilyTiny and battery holder. Take a look at the template and arrange the battery holder and LilyTiny so that their positive and negative sew tabs face each other.

alt text

Then, use a little dab of hot glue on the back of the pieces to adhere to the fabric. Be careful not to fill any of the sewing holes with hot glue.

Don't worry about attaching the LEDs just yet - we'll be deciding where they go in a later step.