Light-Up Plush
Contributors:
Gella
Gella Materials and Tools
Let's go over all of the things you'll need to sew your project together.
Items included in the LilyPad Sewable Electronics Kit:
- The following are found on the LilyPad E-Sewing Protosnap (only available in the kit).
- LilyPad Coin Cell Battery Holder
- 3x LilyPad LEDs (carefully snap out from the panel of five)
- LilyPad Button Board
- LilyPad Slide Switch
- 3V Coin Cell Battery
- Conductive Thread
- Needle
- Plush Templates (1 piece) - see Planning Your Project for printable downloads
- Felt (one 9"x12" sheet of craft felt will make one plush; use scraps of felt to add decorations)
- Fiberfill Stuffing
- Embroidery or Sewing Thread
Don't have a LilyPad Sewable Electronics Kit? You can also follow along with this project using the E-Sewing ProtoSnap Kit:
You will also need:
- Pen, marker, or chalk
- Scissors
- Hot glue gun (with extra glue)
- Optional: Craft supplies for decorating (feathers, sequins, buttons, etc.)