Comments: Getting Started with the SparkFun Blynk Board

≡ Pages

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Member #873344 / about 8 years ago / 2

    The wifi address of my board is different than shown in instruction. It says something like "ESP_CC****".

    Can't connect to app.

  • Member #407490 / about 7 years ago / 1

    When I power up my Blynk board the red powerlight comes on, but the RGB LED does not light up and I cannot connect my board to WiFi. What can I do?

  • Member #808315 / about 9 years ago * / 1

    Please help! My board is fading in and out blue-green but the blynk app (android) still says connecting to blynk-grbb (my board) this may take a moment. Thanks in advance, Elvis. -------------------------Fixed by restarting app-----------------------------

    • Member #573767 / about 9 years ago / 1

      I am having the same problem. board goes green/blue. will not show up as a wifi. i have tried the reset button "0" and that did not work either. any help?/ thanks.


If you've found an issue with this tutorial content, please send us your feedback!