Firefly Jar Assembly Guide

Contributors: b_e_n, Mando

Step 9: Testing 1,2,3

Be aware that the grayed out components on the schematic indicate that they are on the opposite side of the felt piece. Please pay attention to the direction of the word “FACE”.

1. Slide the coin cell battery, positive (+) side up, into the battery holder to test your project. Turn it on and make sure it lights up.
2. Perform any troubleshooting if necessary. (Refer to the E-Textile Basics tutorial for help if you need it.)

NOTE!

Make sure to turn your switch off before continuing to step 10.