Firefly Jar Assembly Guide

Contributors: b_e_n, Mando

Step 2: Get Grounded

Be aware that the grayed out components on the schematic indicate that they are on the opposite side of the felt piece. Please pay attention to the direction of the word “FACE”.

1. With a new piece of thread loop 2-3 times through and around the bottom negative pin of the battery holder.
2. Sew up to the top negative pin. Loop through and around that pin 2-3 times.
3. Sew up to the negative pin on the microcontroller. Loop and knot it there. Cut off any excess thread.