Firefly Jar Assembly Guide

Contributors: b_e_n, Mando

Step 7: You're SEW Negative!

Be aware that the grayed out components on the schematic indicate that they are on the opposite side of the felt piece. Please pay attention to the direction of the word “FACE”.

1. Next, cut a long piece of thread (2 feet) and loop through and around the negative pin on the microcontroller 2-3 times and continue sewing up to your first negative pin on LED 1.
2. Loop through and around it there 2-3 times and continue your trace from right to left. Loop 2-3 times through and around each of the negative pins on LEDs 2-4.
3. Once you reach the negative pin on LED 4, loop and knot it there. Cut off any excess thread.
4. Hooray! This completes your sewing. Check out Step 8 to see what to do next!