Building a Safe Cracking Robot
Build Your Own!
We’ve documented and shared all the lessons we’ve learned in hopes that you can possibly build your own. You’ll need a 3D printer, soldering iron, and the ability to write code and modify 3D files to fit the type of safe you’re trying to open.
This is a complex build so here’s a list of documents:
- Eagle files for the PCB
- Arduino based firmware
- 3D files for the dial coupler and handle puller
- 3D model of the safe
- SparkFun parts list
- Additional Parts:
All in all, we've spent about $200 on our safe cracker, which is a fraction of what professional devices cost.
For the latest files, check out the repo here.