Using EAGLE: Schematic

Pages
Contributors: jimblom
Favorited Favorite 33

Resources and Going Further

This tutorial is the first of a pair. The next tutorial, Using EAGLE: Board Layout, will use the schematic we designed here to lay out a “Bare Bones Arduino” PCB. If you’re headed over to that tutorial next, you can get a head start by clicking the Generate/Switch to Board icon – – to create a board based on this schematic.


If you’d rather read about other EAGLE-related concepts, here are some tutorials you may want to check out:

If you’d like to share your PCB creations with the world, check out these tutorials: