Night-Light Pennant with LilyMini ProtoSnap

Contributors: Gella

Introduction

In this project we’ll control LEDs using the LilyMini ProtoSnap. With the code stored on the LilyMini, our projects can now have more advanced behaviors, and interactions are even reprogrammable. We'll sew the LilyPad components on a pennant shape and customize the theme and decoration.

Design and build time: 3 - 4 hours

This is Project 4 from the LilyPad Sewable Electronics Kit, take a look at the other projects in the kit:

• Project 1: Glowing Pin
• Project 2: Illuminated Mask
• Project 3: Light-Up Plush

Suggested Reading

If this is your first sewable electronics project, we recommend you read our LilyPad Basics tutorial.

For a primer on the LilyMini ProtoSnap, check out this detailed guide.