Designing PCBs: SMD Footprints

Contributors: Nate

Resources and Going Further

That’s it! I hope you’ve enjoyed reading this tutorial about how to make a new footprint, schematic symbol and device under Eagle. From here, you should use the device on a PCB!

To learn more, we recommend you checkout the following:

• Connector Basics
• How to layout an SMD PCB
• SMD Soldering
• Steciling and Reflow
• Creating Custom Footprints in Eagle
• Electronics Assembly

If you'd like to share your PCB creations with the world, check out these tutorials:

• Using GitHub
• Using GitHub to share with SparkFun