Comments: SparkPunk Sequencer Hookup Guide
Looking for answers to technical questions?
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
Instead of tape, I used a rubber band to hold the sliders in place. You don't have to keep retaping that way. Plus it's less waste.
If you've found an issue with this tutorial content, please send us your feedback!
Also, when I was taking inventory of my parts, I couldn't find the nut for the battery encasement bolt and assumed I just dropped it when emptying the bag. But when I started putting the sliders on, I found it wedged in one them. Just thought I'd mention that in case someone else has the same problem. I do realize this is complete joke fodder, so you're welcome on the joke alley-oop setup.