Qwiic Micro Magnetometer - MMC5983MA Hookup Guide
Contributors:
Ell C
Resources and Going Further
Now that you've successfully got your Qwiic Micro Magnetometer up and running, it's time to incorporate it into your own project!
For more information, check out the resources below:
Need some inspiration for your next project? Check out some of these related tutorials:
HMC6343 3-axis Compass Hookup Guide
How to hook the HMC6343 -- a high-end, tilt-compensated compass module -- up to an Arduino. Never get lost again!
Fingerprint Scanner (GT-521Fxx) Hookup Guide
This tutorial provides information about how to connect to ADH-Tech's fingerprint scanner (GT-521F32) and how to use it with Hawley's FPS_GT511C3 library for Arduino.
Sending Sensor Data Over WiFi
This tutorial will show you how setup a simple peer-to-peer connection to send and receive sensor data between two ESP32 WiFi boards.
SparkFun Triple Axis Accelerometer Breakout - BMA400 (Qwiic) Hookup Guide
Add low power triple axis motion monitoring to your Qwiic project using the SparkFun Triple Axis Accelerometer Breakout - BMA400 (Qwiic).