MP3 Player Shield Music Box
Contributors:
HelloTechie
HelloTechie 
Resources and Going Further
If you liked this project, you might want to check out the Elevator TARDIS tutorial too!
 |
| Elevator TARDIS Tutorial |
Need some inspiration for your next project? Check out these other projects!
Creating a Humidor Control Box
Because some of our boards need to be re-humidified after reflow, we decided to make our own humidor. This tutorial will focus on how to model a project in 3D and then fabricate it using a CNC routing machine.
Paper Circuit Pin
This quick craft project shows you how to create a circuit using copper tape instead of wire to light up an LED and make a wearable piece of e-craft art.
Qwiic Pro Kit Project Guide
The Qwiic Pro Kit was designed to allow users to get started with Arduino without the need for soldering or a breadboard. We've included three inputs (a joystick, accelerometer, and proximity sensor) and one display that can be daisy chained to the RedBoard Turbo (SAMD21) Development Board.
Measuring Height with Atmospheric Pressure
Measure height using atmospheric pressure with your Qwiic MicroPressure breakout board!