micro:arcade Kit Experiment Guide
Introduction to the micro:arcade Kit
We love games! We love writing games, building games and yes, even building game consoles. So we want to introduce to you the micro:arcade kit for the micro:bit!
The kit includes our controller:bit carrier board for the micro:bit, which gives you access to a number of pins through the form of buttons in a classic game controller layout. But, that isn't all!
It's one thing to design a "game controller," but what about building a console? A joystick, buttons to mash...the things that make us hard-core arcade fans drool and daydream. This kit is designed for you! The kit includes all of the parts you need to take this lowly controller breakout to a pinball wizard's dream!
|micro:climate Kit SKU
|- Minor revision on the controller:bit (formerly known as the gamer:bit) which includes the Qwiic connector and surface mount edge connector.
- Switch to 2xAAA battery holder with a built-in switch.
Below is all the parts included in the SparkFun micro:arcade kit.
The kit includes the following parts:
- 1x - SparkFun controller:bit — The carrier board for the micro:bit that turns it into a handheld controller, game or other tool.
- 1x - Arcade Joystick — Old-school arcade joystick that uses digital switched for directions.
- 1x - Red Concave Button — Mash away!
- 1x - Blue Concave Button — Jump!
- 1x - Yellow Concave Button — Game over!
- 1x - Green Concave Button — For firin' the laser!
- 1x - micro:bit Battery Holder — Unique 2xAAA battery holder built specifically for the BBC micro:bit
- 16x - Spade Connector Wires — 24 AWG 3 ft wires with a female insulated spade connector at one end and a braided wire lead at the other to connect the arcade buttons and joystick to the controller:bit
How to Use This Guide
We wanted to note that this guide is designed to get you started with the controller:bit board and the SparkFun micro:arcade kit in a straightforward and simple way. We demonstrate each component's functionality and the corresponding code to make it work.
While you explore this guide, we urge you to take your time and tinker with the sensors, code and the ideas shared to build something tailored to your application and creativity. Our goal is to get you enough information and know-how to make you dangerous and then release you into the wild.
Be sure to share your projects with us over Twitter or Facebook! We are excited to see you Start Something!
Before continuing with this guide, we recommend you be somewhat familiar with the concepts in the following tutorials:
What is a Circuit?
All of our experiments and guides are licensed under the Creative Commons Attribution Share-Alike 4.0 Unported License. Feel free to remix and reuse our work. But please, share the love and give us attribution for our hard work!
To view a copy of this license visit this link, or write: Creative Commons, 171 Second Street, Suite 300, San Francisco, CA 94105, USA.