LilyPad Light Sensor V2 Hookup Guide
Contributors:
Gella
Gella 
Resources and Going Further
Here are some resources for e-textiles and planning a project with the light sensor:
- Schematic (PDF)
- Eagle Files (ZIP)
- Datasheet (PDF)
- Lilypad Landing Page
- Planning a Wearable Electronics Project
- Insulation Techniques for e-Textiles
- SFE Education: LilyPad
- GitHub Repo
- SparkFun Product Showcase: Lilypad Light Sensor
Or, you can check out these other great light-based tutorials:
LED Robot Pop Up Card
Craft a paper circuit pop up card with a cycling RGB LED, battery, and copper tape.
PIR Motion Sensor Hookup Guide
An overview of passive infrared (PIR) motion detecting sensors, and how to hook them up to an Arduino.
micro:climate Kit Experiment Guide
A weather station kit that is built on top of the inexpensive, easy-to-use micro:bit and Microsoft MakeCode.
SparkFun gator:bit v2 Hookup Guide
The gator:bit v2 is a breakout board for the BBC micro:bit. The gator:bit exposes almost every pin on the micro:bit to clippable pad with circuit protection. It also has as built-in addressable LEDs and a built-in buzzer.