I2S Audio Breakout Hookup Guide
Contributors:
Alex the Giant
Alex the Giant 
Resources and Going Further
Now that we know how to use the I2S Audio Breakout board, it's time to use it in your own project! For more information on the I2S audio breakout, checkout the links below:
- Schematic (PDF)
- Eagle Files (ZIP)
- MAX98257A Datasheet (PDF)
- Wikipedia: I2S Standard
- GitHub
- SFE Product Showcase
Need some inspiration for your next project? Check out some of these related tutorials:
TeensyView Hookup Guide
A guide to using the TeensyView OLED board to display text and graphics.
Introduction to Operational Amplifiers with LTSpice
Picking up where we left off in "Getting Started with LTSpice," we delve a little deeper into LTSpice through an introduction of Operational Amplifiers (OpAmps).
Red Hat Instrument Kit Hookup Guide
Get started with the Red Hat Instrument kit!
AzureWave Thing Plus (AW-CU488) Hookup Guide
The SparkFun AzureWave Thing Plus is a Feather form-factor development board equipped with the AW-CU488. We'll highlight key features of the board and show you to get started with the development board. A few Arduino examples will be highlighted to connect to a WiFi router, calculate the Fast Fourier Transform (FFT) from an input microphone, output an analog signal to a speaker, and connect an Qwiic-enabled device.