Getting Started with Chibi Chip and Clip

Contributors: bboyho

Troubleshooting

• If the sound animation didn’t appear, try refreshing the page and uploading again.
• Check that your volume is all the way up and unmuted. You can test this by unplugging the audio cable and see if you can hear the static (that’s your code!) when you press the upload button. If you hear the sound then plug the audio cable back in and try uploading again.
• Remember to press the PROG button on your board before you click upload so that it’s in programming mode and the PROG light is red.
• If you are having issues with your circuit or compiling code, check out the debugging tips or chapter listed in the:
  • Love to Code Volume 1 for MakeCode: Debugging (PDF pg 70)
  • Love to Code Volume 1 for ChibiScript and Arduino: Debugging (PDF pg 68)

Still having challenges? Send us a email at info@chibitronics.com.