Comments: CryptoCape Hookup Guide


Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Member #620613 / about 10 years ago / 1

    I've noticed that if you use the "halt" command with the latest Debian build for the Beaglebone Black, it'll automatically reset / lose the Cryptocape's RTC1's current time / date & revert back to the factory preset of Sat 01 Jan 2000 12:04:09 AM UTC .

    I've had to go back and reset the RTC all over again upon the next reboot of my Beaglebone. It only happens when using the "halt" command.

    I'm not experiencing the issue using "reboot" or "shutdown -h now" commands.



If you've found an issue with this tutorial content, please send us your feedback!