Capacitive Touch Slider (CAP1203) Hookup Guide
Contributors:
andreadevo
Resources and Going Further
Fore more on the Capacitive Touch Slider - CAP1203 (Qwiic) check out the links below.
- Schematic (PDF)
- Eagle Files (ZIP)
- Datasheet (PDF)
- Arduino Library
- GitHub Product Repo
- SFE Product Showcase
Need some inspiration for your next project? Check out some of these capacitive touch tutorials below!
Bare Conductive Musical Painting
Learn how to make a musical painting using the Bare Conductive Touch Board and Conductive Paint.
Getting Started with the Teensy
Basic intro to the Teensy line of products, with soldering and programming suggestions.
Electronic E-craft Terrarium
A guest tutorial on an Electronic Terrarium from the Performative Sculpture class of Parsons DT.
Interactive 3D Printed LED Diamond Prop
In this tutorial, we will learn about how to create an interactive theatrical prop for a performance by 3D printing a translucent diamond prop using a non-addressable RGB LED strip and AT42QT1011 capacitive touch sensing.